Name: APC by Schneider Back UPS 1200VA 230V AV - BX1200MI-AZ | Fast IT Solutions Australia
Brand: APC
SKU: BX1200MI-AZ
Price: 257.00 AUD
Availability: OutOfStock

APC by Schneider Back UPS 1200VA 230V AV – BX1200MI-AZ

'inc. GST'

APC Back-UPS provides 1200VA / 650W battery backup with automatic voltage regulation, surge protection, and line-interactive technology to protect computers and electronics from power outages, 2year warranty.

Out of stock

Vendor Code:

SKU: BX1200MI-AZ Categories: Servers and Workstations, Desktops & Servers, UPS Brand: APC

Supplier ID: DIC-BX1200MI-AZ

APC by Schneider Back UPS 1200VA 230V AV

The APC Back‑UPS 1200VA is a reliable uninterruptible power supply designed to protect computers, networking equipment, and other sensitive electronics from power outages, voltage fluctuations, and electrical surges. Built with line-interactive UPS technology and Automatic Voltage Regulation (AVR), it stabilizes incoming voltage while providing battery backup during unexpected power failures.

With a power capacity of 1200VA / 650W, this UPS provides sufficient backup power to safely shut down connected devices during outages, helping prevent data loss and hardware damage. It operates on 230V input and output voltage, making it suitable for offices and home environments that require stable AC

Key Features:

1Gb Network Protection
Automatic Voltage Regulation (AVR)
Functional ease-of-use

Intelligent Battery Management

BX Series devices maximise battery performance, life, and reliability through intelligent, precision charging. Periodic battery self-testing ensures early detection of a battery that needs to be replaced, while early-warning fault analysis on batteries enables timely preventive maintenance.

Automatic Voltage Regulation

BX Series devices automatically correct low/high voltage fluctuations and are Active Power Correction (PFC) compatible. Inclusive surge only outlets are designed to protect secondary electronics from surges without reducing battery power used to run primary electronics during an outage.

LED Indicator and Alarms

Quickly and easily determine the functional status of your UPS by checking the front LED lights. The onboard alarm system provides notification of changing utility power and UPS power conditions.

Visibility and Manageability Software

In the event of an extended power outage, prevent potential data loss or corruption with PowerChute Personal Edition Software.

Specifications:

OUTPUT
Max Configurable Power (Watts)	650 Watts / 1.2kVA
Output Frequency (sync to mains)	50/60 Hz +/- 1 Hz Sync to mains
Topology	Line interactive
Waveform type	Stepped approximation to a sinewave
Transfer Time	6 ms typical : 10 ms maximum
Output Connections (Battery Backup)	4
INPUT
Input frequency	50/60 Hz +/- 5 Hz Auto-sensing
Input voltage range for main operations	140 – 300V
Number of Power Cords	1
Input Power Factor at Full Load	0.54
BATTERIES AND RUN TIME
Battery type	Lead-acid battery
Typical recharge time	8 hours
Nominal Battery Voltage	12 V
Expected Battery Life (years)	3 – 5
Battery Volt-Amp-Hour Capacity	168
COMMUNICATIONS AND MANAGEMENTS
Control panel	LED Status display with on line : on battery
Audible Alarm	Alarm when on battery : distinctive low battery alarm
SURGE PROTECTION AND FILTERING
Surge energy rating	273Joules
Data Line Protection	RJ45 10/100/1000 Base-T Ethernet protection
PHYSICAL
Maximum Height	190MM, 19.0CM
Maximum Width	140MM, 14.0CM
Maximum Depth	390MM, 39.0CM
Net Weight	7.6KG
Colour	Black
ENVIRONMENTAL
Operating Temperature	0 – 40 °C
Operating Relative Humidity	0 – 95 (Non-condensing) %
Operating Elevation	0 – 3000metres
Storage Temperature	-15 – 40 °C
Storage Relative Humidity	0 – 95 (Non-condensing) %
Storage Elevation	0 – 3000metres
Audible noise at 1 metre from surface of unit	40.0dBA
Protection Class	IP20
CONFORMANCE
Approvals	CB , CE, EN/IEC 62040-1, EN/IEC 62040-2, RCM
Equipment protection policy	Lifetime : 50000 euros
SUSTAINABLE OFFER STATUS
RoHS	Compliant

Brand

APC

Server and Workstation

UPS

Warranty

2 Years